Patch Cord & Connectors
ST Patch Cord
SC Patch Cord
Multi-Fiber Patch Cord
MPO Patch Cord
LC Patch Cord
FTTH Patch Cord
FC Patch Cord
E2000 Patch cord
Our wide range of cost effective Optical Patch Cables are widely used in telecom operator equipment rooms, data centers and corporate networks. Optical patch cables provide exceptional transmission performance and low signal losses.Fiber optical patch cables are cables with LC/SC connectors on both ends in various combinations. This ensures that connections can be build more quickly if compared to cable splicing. Fiber optic patch cables are classified by distance. Single mode cables are used for long distance but multimode cables for short distance. Multimode cables OM4 and OM5 can carry signals till respectively 550 meters to 2000 meters. On the other hand Single mode fiber OS2 can carry signal 100km or more. Fiber optic patch cables are distinquished by color. OM4 has Aqua color, OM5 has Green color, but OS2 has Yellow color jacket. Edge Optic cables patch cables are offered in two Jacket material types LSZH and OFNP.
LC-LC-OM4-UPC-DX-A
LC to LC OM4 Duplex, Type A to A, 1-50m Optic Patch Cable
LC-LC-OM4-UPC-DX-B
LC to LC OM4 Duplex, Type A to B, 1-50m Optic Patch Cable
LC-LC-OM5-UPC-DX-A
LC to LC OM5 Duplex, Type A to A, 1-50m Optic Patch Cable
LC-LC-OM5-UPC-DX-B
LC to LC OM5 Duplex, Type A to B, 1-50m Optic Patch Cable
LC-LC-OS2-APC-DX-A
LC to LC OS2 Duplex, Type A to A, 1-50m Optic Patch Cable
LC-LC-OS2-APC-DX-B
LC to LC OS2 Duplex, Type A to B, 1-50m Optic Patch Cable
LC-LC-OS2-UPC-DX-A
LC to LC OS2 Duplex, Type A to A, 1-50m Optic Patch Cable
LC-LC-OS2-UPC-DX-B
LC to LC OS2 Duplex, Type A to B, 1-50m Optic Patch Cable
SC-SC-OM4-UPC-SX
SC to SC OM4 Simplex, Simplex, 1-50 m Optic Patch Cable
SC-SC-OS2-UPC-SX
SC to SC OS2, Simplex, 1-50 m Optic Patch Cable
Connectors
MTRJ Connector
LC Connector
FC Connector
Fast Connector
DIN Connector
D4 Connector
SC Connector
ST Connector
MU Connector
Connector Packages
Ettix Sdn Bhd offer a full suite of industry leading connector embodiment packages based on standardized and custom optical interconnect ferrules.It is a proven connector solutions that designed to exceed industry standard requirements ensuring reliable fiber optic cabling infrastructure through multiple generations of transceiver optics. A commitment to provide only fully vetted, qualified, field serviceable designs ensures that deployment of our optical connectivity solutions will result in pain free network ownership.
Full link optical connector solutions include:
-MTP® brand MPO connectors
-MTP® PRO field configurable connectors
-MDC: ELiMENT® brand Very Small Form Factor (VSFF)
-ELiMENT® brand LC and SC single fiber connectors
-PRIZM®LightTurn® On Board Optic connectors
-Tx/Rx interface connectors/sockets
Precision Optical Components
At the heart of every fiber to fiber and fiber to device interconnect is a precision optical interconnect component. Ettix Sdn Bhd dedicated to driving the next generation of optical links from source to detector by utilizing state of the art precision component design, metrology and manufacturing to produce low loss, cost effective ferrules and optical components optimized with the entire link in mind. Sub-micron component modeling, design, production, measurement and testing are at the heart of engineering focused approach to solving real world communication problems every day.
Precision optical interconnect solutions include:
-Low-loss, MT Elite® multi-fiber ferrules
-PRIZM® MT lensed based ferrules
-PRIZM® LightTurn® ferrules for various fiber optic coupling applications
-Lensed based precision components for active device receptacles optimized for coupling to and from the fiber optic ferrule and connector designs
-Full link optical modeling ensuring the right optical components are selected for performance and cost optimization
Range of Products
MTP® Connectors + DirectConec™ Push-Pull Boot
DirectConec™ push-pull technology enables the highest functional density in fiber cabling environments without the need for pull tabs or field tools. Ettix Sdn Bhd has now incorporated this technology into multiple connector platforms, including the flagship MTP® connector product line.
Features
All-in-one boot and push-pull tab
Newly branded MTP® outer housing
Easy insertion and removal from adapter
Improved access to array of MTP® connectors
2.0, 2.5 and 3.0mm cable diameter compatible
Compatible with all US Conec industry leading optical performance grade connectors
MMC Connector
The revolutionary MMC connector ushers in a new era of high density, low insertion loss connectivity by combining a new, reduced size, MT-style ferrule (TMT) with a novel very small form factor (VSFF) connector embodiment. Employing the push-pull technology, the MMC connector enables the highest functional fiber density available in the market. Simplified gender and polarity management greatly reduces the complexity associated with MPO cabling infrastructure. MMC connectivity enables solutions that minimize the space required across multiple applications, including structured cabling, high fiber count data center interconnects, transceivers and on-board optics.
Features
Simplified Polarity Management
Top & Bottom rail features ensure connector is installed in correct polarity orientation
Proven Alignment Structure
The TMT ferrule format is compliant with the IEC 61755 and 61754 precision alignment structure for MT and MT-16 Ferrules. 250µm pitch fiber holes enable use with standard 250µm OD SM and MM fibers in addition to smaller OD fibers including 200µm and 165µm.
Optical Performance
MMC solutions enable Low Loss, IEC Grade B insertion loss performance and are APC for superior return loss
High Density Footprint
The MMC connector with the Push-Pull Boot enables functional high density applications
Error-Free Assembly
The TMT ferrule is keyed to the MMC housing for error-free assembly
MMC Engagement Length
Long engagement length of precision features ensures mated ferrule stability, allowing a single latch design for minimizing debris & maintaining industry standard 250um pitch optical interface
MMC Adapter Options
We offers 2-port and 4-port adapters connecting MMC connectors to MMC connectors or MMC Jr. connectors.
The 2-port adapters are designed to fit through the same panel cutout as MPO (SC cutout) adapters, creating an
instant doubling of fiber density by simply removing the simplex MPO adapters and installing the MMC 2-port
adapters. The 4-port MMC adapters will fit into the same panel cutout as 4-port MDC adapters.
All adapters can be ordered with or without dust plugs pre-installed in the adapters. For applications where certain
adapter ports are not needed,Ettix Sdn Bhd offers optional port covers that can be installed into those ports
ELiMENT® Simplex Connectors
ELiMENT® LC Connectors
Ettix Sdn Bhd offers a high performance single fiber LC connector that exceeds GR 326-CORE, Issue 4 requirements.
US Conec LC ferrules have a flat end face and are fully compliant to TIA/EIA-604-10B, IEC 61754-20, RoHS2 and
REACH 169 directives
Features
•MM, SM, and APC
•900μm and 1.6/2.0mm cable boots
•One-piece tunable connector body
•Yellow and white heat shrinks available
• Meets IEC Attenuation Grade B random mating requirements
(0.12 dB mean, 0.25 dB maximum for ≥ 97% of the connectors)
ELiMENT® SC Connectors
Ettix Sdn Bhd offers a one-piece SC connector that exceeds GR 326-CORE, Issue 4 requirements.This singlemode
and multi-mode 2.5mm diameter ferrules have a pre-radiused end face, meet TIA/EIA-604-3B, IEC 61754-4, and
are compliant with RoHS2 and REACH 169 directives
Features
• MM, SM, and APC
• 900μm, 2.0mm and 3.0mm cable boots
• One-piece body design
• Meets IEC Attenuation Grade B random mating requirements
(0.12 dB mean, 0.25 dB maximum for ≥ 97% of the connectors)
ELiMENT® Duplex LC Uniboot
ELiMENT® Duplex LC Uniboot is a high performance two-in-one LC connector that provides quick and
easy toolless polarity reversal. The Duplex LC Uniboot reduces internal fiber damage by limiting fiber rotation to
180 degrees while eliminating exposed fibers during polarity reversal.
The redesigned low profile housing of the Duplex LC Uniboot is designed for high density applications. When
maximizing panel density, the adapters can be stacked and the connector can be disconnected by grasping the
sides of the housing or by using the push-pull boot. The push-pull technology provides
access to the connector for effortless insertion and extraction.
Features
• PC and APC Uniboot connectors are polished as
duplex connectors
• No tool required for polarity reversal
• Color coded polarity window clearly visible
• Engineered installation tools designed to increase
operator output, reduce scrap, and improve firsttime yields
• Low profile design and DirectConec™ push-pull
boot for high density applications
• 2mm and 3mm cable options available for MM,
SM, and APC applications
• Meets IEC Attenuation Grade B random mating
requirements (0.12 dB mean, 0.25 dB maximum
for ≥ 97% of the connectors)
Industrial Grade /Harsh Environment Connectors
Fiber Adapters
